fire retardant products
FIRE RETARDANT PRODUCTS Home  |   News & Literature  |  Ask an Expert  |  Become a Distributor  |  Links  |  Site Map  |  Contact Us

BURN BARRIER™ PF-1 CLEAR FIRE RETARDANT COATING


BURN BARRIER™ – PF-1 is a clear, waterbase fire retardant coating for use on polyester
flowers and plants.It is paint-like in appearance and dries to a clear satin finish in approximately
12-16 hours. Coated plants are washable by sprinkling with mild soap and rinsing
with water.

Application:
Stir well with paddle before using. The coating is applied by either dipping or spraying.
Dipping is recommended for uniformity. Use heavy duty spray equipment for spraying. Protect
areas to avoid damage to property. Minimal reduction with water may be necessary to obtain
a lower consistency for uniform application. After applying, leaves that are sticking must
be separated while wet. Test a small sample before staring the project. Test for
flammability.

WARNING:
USE WITH ADEQUATE VENTILATION. Avoid prolonged breathing of vapors and prolonged
contact with skin. After using and before eating or smoking, wash hands thoroughly. Do
not take internally. Keep container closed when not in use. KEEP OUT OF REACH OF
CHILDREN.

Information provided herein is based on tests believed to be reliable. Inasmuch as
Fire Retardants Inc. has no control over the use or application to which others may put this
material, we make no guarantee or warranty. Our products are sold on the condition that
each user of the material make their own evaluation to determine the material's suitability for
their own particular use.

CAUTION: It is recommended that a test application be completed prior to end use.

Product Spec Sheet Flame Test


Fire Retardants, Inc.
123 Columbia Court North • Suite 201 • Chaska, MN 55318
Toll Free: 1-800-854-4957 · Tel: 952-448-7377 · Fax: 952-448-2613