fire retardant products
FIRE RETARDANT PRODUCTS Home  |   News & Literature  |  Ask an Expert  |  Become a Distributor  |  Links  |  Site Map  |  Contact Us

BURN BARRIER™ 20-20 FLAT LATEX INTUMESCENT
FIRE RETARDANT PAINT CLASS A

Product Description:
BURN BARRIER™ 20-20 is a latex (water base) intumescent fire retardant paint, manufactured
and tested in accordance with Federal Specification TT-P-001932. This product is
designed for use on interior surfaces where it is either necessary or desirous to reduce
the surface burning characteristics of the substrate. It dries quickly to a flat matte finish,
having the appearance of a conventional flat paint. In the presence of heat or flame, the coating
puffs up (intumesces) and forms a thick sponge like cellular foam layer, this foam layer
insulates the substrate reducing the penetration of heat, thus retarding the flame spread and
prolonging structural collapse.
Fire Tests:
Flame Spread Ratings: Class "A". When tested in accordance with ASTM E-84 (NFPA 255)
the coating obtained the following fire hazard classification. A complete Underwriters
Laboratory report is available below for download.

FIRE HAZARD CLASSIFICATION:

Surface Douglas Fir
Flame Spread Rating 25
Fuel Contributed 15
Smoke Developed 20
Number of preliminary coats None
Rate per coat:  
sq.ft./gal. U.S. (Imp) 230 (275)
Number of Overcoats None


Surface Preparation:
All surface preparation should be carried out in accordance with good painting practices.
Remove all loose peeling or powdery paint from the surface. All dirt, grease, oil, wax and
other foreign matter MUST be removed with a detergent, rinse surface thoroughly with clear
water and allow to dry. Repair all cracks, holes, and other surface irregularities. Allow to dry,
sand lightly and prime repaired surface. All glossy or smooth surfaces should be dulled
with sandpaper. For best appearance, new wood surfaces should be sealed with BURN
BARRIER™ 3001 Alkyd Prime.
Tinting:
Available in white, off-white and pastel shades, or may be field tinted with most universal tinting
colorants. Tinting colorants should not exceed two fluid ounces per gallon.
Packaging:
Standard packaging, 1 gallon, 5 gallon and 55 gallon containers.
PRECAUTIONS:
CAUTION! Do not take internally. Close container after each use. KEEP OUT OF REACH OF

CHILDREN.
Protect from freezing. Information provided herein is based on tests believed to be reliable. Inasmuch as Fire Retardants Inc. has no control over the use or application to which others may put this material, we make no guarantee or warranty. Our products are sold on the condition that each user of the material make their own evaluation to determine the material's suitability for their own particular use.

© Fire Retardants Inc. All Rights Reserved.

Color Options:


Click Here to be Emailed Material Safety Data Sheet (MSDS) Surface Burning Characteristics 2
Product Tech Spec    

Fire Retardants, Inc.
123 Columbia Court North • Suite 201 • Chaska, MN 55318
Toll Free: 1-800-854-4957 · Tel: 952-448-7377 · Fax: 952-448-2613